Stratocaster Replacement Vintage Neck Maple Unfinished, 21 Fret, 9 1/2" Radius Charvel

Stratocaster Replacement Vintage Neck Maple Unfinished, 21 Fret, 9 1/2" Radius CharvelReplacement vintage style Stratocaster guitar neck, made in Japan. This neck has a slightly flatter than vintage spec. 9 1 2" (240mm) fingerboard radius to allow for easier string bending. Jumbo frets (Crown: 2. 62mm width, 1. 17mm height) 21 frets. 9 1 2" inch radius 42mm width at nut slot. 8. 5mm diameter tuning machine holes. Ready for finishing. Trussrod adjustment at heel end of neck. One piece maple neck with skunk stripe on the back no separate

Will fit standard layout USA Fender Stratocaster guitars

Straight: 3/16″ ( 4

This provides a knife-edge style set-up with reduced friction but with the same feel as the VS-100

Brass P-90 cover

units to be his highest quality range

1000k is commonly used on Fender Jazzmaster and Jaguar guitars

The HBMN‑5 brings the classic Stingray‑style humbucker sound to 5‑string basses

Used on Blackface era amplifiers and '65 Twin Reverb‚®

Made from vintage-style 5-ply black/cream/black/cream/black PVC

The titanium is then annealed at a very high-temperature in an argon gas atmosphere to create a very high structural stability within the saddle and increase its overall durability and strength

For ES-125T please see our EST-7600 series guards Dark brown tortoiseshell celluloid top layer with a PVC White / Black / White laminate underneath

We recommend purchasing our Gibson braided wire