Bando P60-14M-40 HT QD Timing Belt Pulley (E) V-belts & Power Transmission EquipmentBando P60 14M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
lb Locked rotor torque 210 % Breakdown torque 240 % Locked rotor time 39s (cold) 22s (hot) Moment of inertia (J) 166 sq
0 V Design Code - Drip Cover No Drip Cover Duty Rating CONT Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 9
Front type Double Actuation form Pulsator Front color Standard Actuation signaling Not contain Front coating Uncoated Specific function Without lettering Installation diameter 22 mm Degree of protection IP52 Weight 0
3 LB-FT Locked-Rotor Torque 7
7 POLES 2 NUMBER SPEEDS 1 RPM 3525 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 184 SHAFT CODE JM MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE UTE4 OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6307-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
0 A Rated torque 3080 ft
15 STARTCAPMFD N\A SHIPPING WEIGHT 1060 BREAKDOWN TORQUE 232 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 158 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER F LOCKED ROTOR AMPS 570
Product Pushbutton Type Illuminated recessed Color Red Degree of protection IP65 Voltage class 600 Application duty Hazardous duty Certification CE Attributes
ColorSemi Translucent Amber
19 % Rated voltage 208-230/460 V Rated current 2
06-0000-0194 CAT
Starting duty cycle AC-53b 3-30:1170 Starting regime (with ventilation kit) AC-53b 3-30:330 Standard (3 leads) Yes Inside delta (6 leads) No SoftPLC (ladder programming) No Voltage ramp Yes Voltage ramp and current limit No Current limit Yes Current limitation ramp Programammable via optional Pump control Programmable via optional Torque control No Direct on line start Programmable via optional Product certification UL
