MNT40 FAI Tower Launcher *** NOW IN TWO SIZES*** Size:100 cm

MNT40 FAI Tower Launcher *** NOW IN TWO SIZES*** Size:100 cmIn order to launch the SK 369 you will need a tower launcher. The MNT 40 will get your models off the ground. It includes three 12 mm carbon fiber tubes (500 mm long or 1000 mm long), a laser cut acrylic top, a 3D printed base with a threaded 1 4 20 mounting hole and the hardware to assemble all of the parts. The tower components are screwed together for launch and disassembled for easy transport to and from the range. All that you need to add is

Design by Brian Muzek

Wiping the part down with a microfiber cloth soaked with isopropyl alcohol is recommended

and S9A (A helicopter duration) events flow with 13mm Estes motors

The stand can be easily purchased from Amazon or most retailers

The parts in this upgrade kit added to an Estes Der Big Red Max kit (not included) will allow you to do this

They have been processed post printing to remove residual resin and support material

four grid fins

This part is printed using resin material and a SLA printer

Use of our FAI Fin Jig to do this is highly recommended

a 3D printed base with a threaded 1/4 20 mounting hole and the hardware to assemble all of the parts

the material has mechanical properties similar to PVC

The laser cut centering rings and fins will allow you to do this