Vintage Single Coil Pickup Screw Gold (Bag of 8) ES-125

Vintage Single Coil Pickup Screw Gold (Bag of 8) ES-125"6 32 X 5 8" PHILLIPS OVAL HEAD MACHINE SCREW GOLD US THREADS these screws are used to adjust the pickup height on vintage guitars where the hole is countersunk so that the screws sit in the pickguard, not on it. (Metric measurements: 14mm length. 3. 5mm thread diameter x 11mm thread length.)

Aluminium U channel has a 5mm steel rod inside

6mm pickup cover width

411mm length

high‑output take on the classic Jazz Bass bridge pickup

Please note that this Jazz Bass bass neck comes completely fretted but without any nut fitted - this needs to be ordered separately - please see pre-slotted Tusq nut by GraphTech here

With chapters on designing the guitar

This frees the tuner post to rotate which raises or lowers the height of the string hole

Please see product code DBAS4 if your Dimension Bass is the American-made version This pickguard is made from red mirror - a clear acrylic material measuring

This pickguard is NOT made for USA Gibson manufactured Les Paul guitar

Thickness at 1st fret -22

43mm centre to centre of the two outer holes

Terminal assignment: There are a total of 12 solder terminals (lugs) on this switch