Laser Cut Plywood Doorknob Fins and Centering Rings Upgrade for Estes Kit

Laser Cut Plywood Doorknob Fins and Centering Rings Upgrade for Estes KitSet of four laser cut 1 8" plywood fins and three laser cut 1 8" plywood centering rings to replace the balsa fins and cardboard centering rings featured in the kit. Compatible with the standard kit or our Ultimate Scale Fin Can.

The final finishing is straightforward

Set of four laser cut 1/8" plywood fins and three laser cut 1/8" plywood centering rings to replace the balsa fins and cardboard centering rings featured in the kit

and helicopter duration are different than NAR rules in that the airframe has specifications for length and diameter

It includes the 3D printed fin can (which has the fins supports and the vent holes seen on the prototype)

They have been processed post printing to remove residual resin and support material

Why not upsize it from a BT-60 to a 3" body tube with a 29mm motor mount

It can be used for S3A (A parachute duration)

com/Falcon-9-Crew-Dragon-Plan

The leading edge taper is included in the print

Features nose cone

It is 3D printed with the same smooth finish material that we use for our scale parts

replacing the Der Big Red Max card stock centering rings with the plywood centering rings