QS8-S Connector Set

QS8-S Connector SetThe QS8 S connector is a high power electrical connector. Its used on our 6S 28Ah Lithium ion Battery and provides 110A continuous discharge rating. Comes as a set with male and female connectors and covers for the wire connections. Soldering is required for assembly. It can handle 110A continuous current at up to 600V. Its similar to the common XT90 connector, but bigger. Contents 1 x QS8 S Connector, Male 1 x QS8 S Connector, Female 2 x QS8

This kit contains moldable cable sealing compound

It’s designed primarily to be used on the BlueROV2 and other ROVs for navigation in low-visibility water conditions

300m+ tether length capability (published capability of 2000m)

Low-Light HD USB Camera

Subconn MCIL6M(60cm) Operating Depth 1

It’s the easiest to use solution out there

You’ll need:

1 x Clockwise Propeller

With a diving time of four hours

The Omniscan 450 SS is tailored for side-scan applications

allowing pass-through connections for the Fathom-X signal and an auxiliary twisted pair

The A125 is designed with small and medium sized ROVs/AUVs/USVs in mind where it can easily be mounted without significantly affecting the vehicle