Pressurized rainwater purification unit, plug and play for household Smoothing inlet

Pressurized rainwater purification unit, plug and play for household Smoothing inletA "plug and play system for the purification of rainwater from a rainwater tank. This will purify harvested rooftop rainwater to potable water quality standard for any household or community. Ideally suited for a 5 6 person household in a multi story house or for a small community with a centralized rainwater harvesting system. The unit pre set and tested to 6 Bar in our factory and can be installed and connected by a good plumber and an electrician.

It consists of 22mm fittings

Semi-permanent display

The WISY Medium Capacity Vortex Fine Filter is used in installations where multiple downspouts are connected to a single pipe into the vortex filter

No external odours can enter that tank nor vermin or small creature that reside in underground pipe systems

In order to eliminate the risk of accidentally pumping rainwater into the municipal supply

The unit is in stock and can be shipped within two days to any major town in South Africa

Mount it in a 110mm downpipe and recover 95% of water from the roof section

In order to protect you and prevent the purified rainwater from flowing back into the municipal water supply you have to install a backflow preventer valve

The float switch will that deactivate the solenoid valve and close the water supply to the tank at a certain level

The filter element is made of stainless steel

The WISY WFF 100 connects to a 4" pipe for above- or belowground storage

The housing of RainCollector RS is made of UV-resistant polypropylene