Firebird - Dark Brown Celluloid Tortoiseshell W/B/W Lamination 1981 to 1983 Original Bullet

Firebird - Dark Brown Celluloid Tortoiseshell W/B/W Lamination 1981 to 1983 Original BulletPlease note that this pickguard will only fit a genuine original 1960s Gibson Firebird with mini buckers. It will not fit the current Gibson version. Dark brown tortoiseshell celluloid top layer with a PVC White Black White laminate underneath. Comes with a peel off clear protective film attached to top side to protect the surface during cutting and installation. We are unable to accept returns if this clear film has been removed.

Kluson introduces the new Tele half bridge specifically designed for Telecasters with vintage bridge specification requirements but cut down to allow for the installation of a humbucker or body mounting the original single coil instead of the full-size plate

The housing provides a maximum bearing for worm

97mm) w/ opposing flat sides

Dress Lip height= 1/16 in

Epiphone bridges are manufactured by several different factories in several Asian countries

3 millimetres)

enabling compatibility with headstocks drilled to a larger diameter

This pickguard is an exact template of the Eric Clapton

This pickguard will not fit 20 fret

Tab Length = 1

Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench

These are developed using ‚±9% tolerances which is better than industry standard of 20% tolerance