BMR 10-15 5th Gen Camaro Rear Upper Control Arm Bushing Kit (Delrin) - Red Air Intake Systems>Intake Elbows

BMR 10-15 5th Gen Camaro Rear Upper Control Arm Bushing Kit (Delrin) - Red Air Intake Systems>Intake ElbowsReduce spindle movement and dynamic rear alignment changes with a Delrin upper control arm bushing from BMR's suspension. The factory upper A arm has a bearing at the front of the A arm and a large rubber bushing at the rear, which allows for a large amount of unwanted movement. This allows for excess spindle movement, which absorbs power when transferring it to the tires. This counter rotation leads to uncontrollable wheel hop and inconsistent

7L Cummins RP-4G-150 Fuel Pump

Add on the optional Super-Scoop

C3500 1986-1979

ARP Chevy SBC/GenIII LS 3/8in Flange SS 12pt Header Bolt Kit

Bilstein B12 (Pro-Kit) suspension kits include a complete set of Bilstein Performance dampers paired with Eibach (Pro-Kit) springs that provide moderate lowering between 24-40mm (depending on application)

INOVIT™ Rotor is a clean five spoke design with extreme detail in the center of the wheel

black anodize finish

These lowered air temperatures and freer flow allowed the AWE Porsche 991 Turbo S to achieve dyno-verified max gains of 26 HP and 21 lb-ft of torque at the crank when used with the AWE 991 Turbo Performance Exhaust and S-FLO Carbon Intake

Size :  20x10

Stamped Steel Construction: This actuator is constructed of black coated stamped steel for strength and durability

The AWE SwitchPath™ remote works with the stock exhaust

All components are replaceable