Bando 448MXL6.4G MXL Timing Belt ENCODER KITS

Bando 448MXL6.4G MXL Timing Belt ENCODER KITSBando 448MXL6. 4G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong

35 LB-FT Starting Current 12

410 Line Amps 0

542 A Rated torque 1

5 POLES 4 NUMBER SPEEDS 1 RPM 1730 RPM 2 1730 HERTZ 60 VOLTS PRIMARY 115/230 VOLTS 230 VOLTS 2 115 FRME 182 SHAFT CODE JM ASSEMBLY POSITION F1 MOTOR TYPE DM4 OPPOSITE END BEARING 6204-2Z-J/C3 SHAFT END BEARING 6307-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

375 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Speed 3520 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

5 TE VOLTS 460 AMP 9

5 a Front Face Code Brake Mounting Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3518M Mounting Arrangement F1 Number of Poles 4 Overall Length 15

9 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code P Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 18 AWG Motor Type 3546M Mounting Arrangement F1 Number of Poles 2 Overall Length 15

lb Locked rotor torque 220 % Breakdown torque 250 % Locked rotor time 0s (cold) 0s (hot) Moment of inertia (J) 0

7 No load current 91

Fasco7021-9567

Bando - P28L100 The type of pulley used on a Synchro-Link® drive depends on a number of factors