Bando P24H100 SDS QD Timing Belt Pulley (SDS) Components

Bando P24H100 SDS QD Timing Belt Pulley (SDS) ComponentsBando P24H100 SDS The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

625 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 3560 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None XP Temp Code T3 Drawings

35Z185-0498G1 HP 1 VOLTS 115/230 AMP 12/6 RPM 3450 FRAME 56J SER

Bando - 60-S2M-286 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile

Reference BMJ Application Contactor CWME Application complement 800 Finishing Unspecified Material PLASTIC Attributes

5 LB-FT Locked-Rotor Torque 7

EM2516T SPEC

2 a Frame Prefix D Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code - Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3320M Mounting Arrangement F2 Number of Poles 4 Overall Length 10

Bando - 250-S8M-896 C-X

lb Locked rotor torque 260 % Breakdown torque 300 % Locked rotor time 39s (cold) 22s (hot) Moment of inertia (J) 0

Bando - 150-S8M-888 C-X

Siemens45DG20AF

35AA003M784G1 HP 1